Construction Materials
Chemical Testing, Concrete Testing, Soil Testing in Dubai, UAE.
AHSL have extensive facility for physical, mechanical and chemical testing of a wide variety of materials and products to National, International and other regional standards and specifications in accordance with BS, BS EN ISO, ASTM, AASHTO, DIN, CIRIA, etc.
Services are offered from four ISO 9001 certified regional laboratories in UAE. Facilities in Abu Dhabi, Dubai, Kalba and Ras Al Khaimah are accredited to ISO/IEC 17025 by ENAS / DAC. The services offered in UAE are also supported by Head Office laboratory in Saudi Arabia and associate laboratories in UK.
Provision of qualified and experienced personnel for field inspection/testing including establishment & management of site laboratories is offered, Please Contact Us to discuss your testing program or specific requirement.
List Of Tests
| Sl.No. | Test description | Test Method |
| 1 | In-situ density by sand replacement method using large / small pouring cylinder |
BS 1377 Part 9 : 2.2/2.1 |
| 2 | In-place density test by sand cone method | ASTM D 1556 |
| 3 | In-situ density test using nuclear densitometer | BS 1377 Part 9 ASTM D 6938 |
| 4 | Dry density – moisture content relationship (MDD-OMC) |
BS 1377 Part 4 ASTM D 1557 |
| 5 | Maximum/minimum density test | BS1377 Part 4 |
| 6 | Maximum and minimum density – by vibrating table | ASTM D4253/4254 |
| 7 | Particle size distribution by sieve analysis | BS 1377 Part 2 / ASTM C136 |
| 8 | Particle size distribution by hydrometer method | BS 1377 Part 2 ASTM D 422 |
| 9 | Coefficient of uniformity (Cu) | ASTM D 2487 |
| 10 | Liquid limit | BS 1377 Part 2 ASTM D 4318 / AASHTO T 89 |
| 11 | Plastic limit & plasticity index determination | BS 1377 Part 2 AMD 9027 ASTM D 4318 / AASHTO T 90 |
| 12 | California Bearing Ratio (soaked) | BS 1377 Part 4 AASHTO T 193 / ASTM D 1883 |
| 13 | In-situ CBR | BS 1377 Part 9 |
| 14 | Moisture content determination | BS 1377 Part 2 ASTM D 2216 |
| 15 | Moisture content by calcium carbide gas pressure Tester |
ASTM D 4944 |
| 16 | Soil classification | ASTM D 2487 ASTM D 3282 / AASHTO M 145 |
| 17 | Shear box test | BS 1377 Part 7 |
| 18 | Soil permeability test | BS 1377 Part 5 |
| 19 | Linear shrinkage test | BS 1377 Part 2 |
| 20 | Particle density determination | BS 1377 Part 2 |
| 21 | Bulk density and dry density determination | BS 1377 Part 2 |
| 22 | Maximum and minimum density determination | BS1377 Part 4 |
| 23 | Maximum and minimum densities – by vibrating table | ASTM D4253/4254 |
| 24 | Plate load test | ASTM D 1196 BS 1377 Part 9 |
| 25 | Dynamic Cone Penetration Test (DCPT) | ASTM D 6951 |
| 26 | Thermal conductivity in soil | ASTM D 5334 |
| 27 | Electrical resistivity determination | BS 1377 Part 2 / ASTM C136 |
| Sl.No. | Test description | Test Method |
| 1 | Sampling of aggregates | ASTM D 75 |
| 2 | Particle size distribution (dry/wet sieving) | BS 812 Part 103.1 / ASTM C136 |
| 3 | Materials Finer than 75µm Sieve (Fines Passing No. 200) in Mineral Aggregates by Washing |
BS 812 Part 10 / ASTM C 117 / AASHTO T11 |
| 4 | Specific gravity & water absorption of coarse agregates | ASTM C 127 |
| 5 | Specific gravity & water absorption of fine agregates | ASTM C 128 |
| 6 | Particle density & water absorption | BS 812 Part 2 |
| 7 | Clay lumps and friable particles | ASTM C142 |
| 8 | Bulk density detemination | BS 812 Part 2 |
| 9 | Moisture content determination | BS 812 Part 109 |
| 10 | Flakiness Index of aggregates | BS 812 Part 105.1 |
| 11 | Elongation Index of aggregates | BS 812 Part 105.2 |
| 12 | Shell content determination | BS 812 Part 106 BS EN 933 Part 7 |
| 13 | Aggregate crushing value | BS 812 Part 110 |
| 14 | Ten percent fines value | BS 812 Part 111 |
| 15 | Aggregate impact value | BS 812 Part 112 |
| 16 | Sand equivalent value | ASTM D2419 |
| 17 | Soundness of aggregates by the use of sodium sulphate and magnesium sulphate |
ASTM C 88 BS 812 Part 121 |
| 18 | Organic Impurities | ASTM C40 |
| 19 | Shell Content | BS 812 Part 106 |
| 20 | Lightweight pieces | ASTM C123 |
| 21 | Sulphate content | BS 812 Part 117 |
| 22 | Chloride content | BS 812 Part 117 |
| 23 | Drying shrinkage | BS 812 Part 120 |
| 24 | Potential Alkali Reactivity – mortar bar method | ASTM C1260 / C227 |
| 25 | Potential Alkali Reactivity – chemical method | ASTM C289 |
| 26 | Potential Alkali Reactivity – rock cylinder method | ASTM C586 |
| 27 | Los Angeles abrasion | ASTM C131 / C535 |
| 28 | Micro Deval test | BS EN 1097-1 |
| 29 | Aggregate abrasion value (UK) | BS 812 Part 113 |
| 30 | Polished stone value (UK) | BS EN 1097-8 |
| 31 | Petrographic examination (UK) | ASTM C295 / BS EN 932-3 |
| 32 | Grading of rock by weight distribution | The Rock Manual C683 / CIRIA 1991 BS EN 13383 |
| 33 | Aspect ratio (shape index) | The Rock Manual C683 / CIRIA 1991 BS EN 13383 |
| 34 | Drop test breakage index | The Rock Manual C683 / CIRIA 1991 BS EN 13383 |
| 35 | Sampling of rock | CIRIA SP83 / BS EN 13383 |
| 36 | Density and water absorption | CIRIA SP83 / BS EN 13383-2 |
| 37 | Point load index test | ISRM |
| 38 | Uniaxial compressive strength | ISRM |
| 39 | Unconfined compressive strength | ASTM D2398 / EN 1926 / CIRIA RM |
| 40 | Resistance to wear by Los Angeles abrasion | BS EN 1097-2 / ASTM C535 |
| 41 | Ten percent fines value | BS 812 Part 111 |
| 42 | Resistance to weathering | EN 1367-2 / BS 812 Part 121/ ASTM C88 |
| 43 | Aggregate impact value | BS 812 Part 112 |
| 44 | Methylene blue absorption | BS EN 933-9 |
| 45 | Moh’s hardness | BS 6431 Part 13 / BS EN 101 |
| 46 | Full chemical analysis of rock | IEP OES / CIRIA |
| Sl.No. | Test description | Test Method |
| Fresh concrete | ||
| 1 | Sampling of fresh concrete at site | BS 1881 Part 101 |
| 2 | Slump and temperature of concrete | BS 1881 Part 102 / ASTM C143/C1064 |
| 3 | Air content in fresh concrete | BS 1881 Part 106 |
| 4 | density of compacted fresh concrete | BS 1881 Part 107 |
| 5 | Bleeding of fresh concrete | ASTM C232 |
| 6 | Concrete setting time (initial/final) | ASTM C403/403M |
| 7 | Water-cement ratio | BS 1881 Part 2 |
| 8 | Yield/cement content of fresh concrete | ASTM C138/C138M |
| 9 | Drying shrinkage of agg. In concrete | BS 812 / BS 1881 Part 5 |
| 10 | Monitoring of temperature in concrete using Intellirock loggers | IHTP |
| Hardened concrete | ||
| 11 | Curing of test specimens (20 oC method) | BS 1881 Part 111 |
| 12 | Compressive strength of concrete cubes | BS 1881 Part 116 / BS EN 12390 Part 3 |
| 13 | Density of concrete cubes | BS 1881 Part 114 |
| 14 | Compressive strength of concrete cylinder | ASTM C39/C39M |
| 15 | Tensile splitting strength | BS 1881 Part 117 |
| 16 | Flexural strength of concrete beam | BS 1881 Part 118 |
| 17 | Modulus of elasticity of cylinder | ASTM C469 |
| 18 | Water absorption of hardened concrete | BS 1881 Part 122 |
| 19 | Water permeability (depth of penetration) | DIN 1048 / BS EN 12390 Part 8 |
| 20 | Initial surface absorption test (ISAT) | BS 1881 Part 208 |
| 21 | Electrical indication of concrete ability to resist choride ion penetration (RCP) | ASTM C1202 / AASHTO T277 |
| 22 | Porosity of hardened concrete (absorption in vacuum) | RILEM |
| 23 | Acid soluble chloride content | BS 1881 Part 124 |
| 24 | Acid soluble sulphate content | BS 1881 Part 124 |
| 25 | Porosity | RILEM CPC 11.3 |
| 26 | Pull off test of plaster | BS 1881 Part 207 |
| 27 | Ultrasonic pulse velocity in concrete | BS 1881 Part 203 |
| 28 | Half cell potential survey | ASTM C876 |
| 29 | Surface hardness test by rebound hammer | BS EN 12504-2 |
| 30 | Covermeter survey | BS 1881 Part 204 |
| 31 | Delamination survey by hammer tapping | ASTM C4580 |
| 32 | Chloride/sulphate ingress | BS 1881 Part 124 |
| 33 | Depth of carbonation | CS Tech.Report #38 |
| 34 | Low strain integrity of concrete piles | ASTM D5882 / IHTP |
| Sl.No. | Test description | Test Method |
| 1 | Sampling of bituminous paving mixture | ASTM D979 |
| 2 | Bitumen content determination by extraction method | ASTM D2172/2172M |
| 3 | Particle size analysis of extracted aggregate | ASTM D5444 |
| 4 | Rate of spray/application | ASTM D2995 |
| 5 | Thickness and density of compacted bituminous mixture | ASTM D3549 |
| 6 | Marshall density | ASTM D6926/D2726 |
| 7 | Theoretical maximum specific gravity & density of bituminous paving mixture | ASTM D2041 |
| 8 | Percentage Voidage in compacted bituminous paving mixture | DMS-9 |
| 9 | Loss of stability of bituminous mixture | DMS-10 |
| 10 | Stability of bituminous mixture | ASTM D6927/6926 |
| 11 | Flow of bituminous mixture | ASTM D6927/6926 |
| 12 | Stiffness of bituminous mixture | ASTM D6927 |
| 13 | Coating & stripping test of bitumen aggregate mixture | ASTM D1664 |
| 14 | Specific gravity | ASTM D70 |
| 15 | Penetration | ASTM D5 |
| 16 | Ductility | ASTM D113 |
| 17 | Flash point | ASTM D92 |
| 18 | Solubility | ASTM D2042 |
| 19 | Softening point | ASTM D36 |
| 20 | Kinematic viscosity | ASTM D2170 |
| 21 | Thin-film oven test loss of heating | ASTM D1754 |
| 22 | Saybolt furol/universal viscosity | ASTM D244 |
| Sl.No. | Test description | Test Method |
| Cement | ||
| 1 | Compressive strength | BS EN 196 / BS 12 /BS 4027 / ASTM C150 |
| 2 | Flexural strength | BS EN 196 / BS 12 /BS 4027 / ASTM C150 |
| 3 | Consistency | BS EN 196 / BS 12 /BS 4027 / ASTM C150 |
| 4 | Setting time | BS EN 196 / BS 12 /BS 4027 / ASTM C150 |
| 5 | Soundness | BS EN 196 / BS 12 /BS 4027 / ASTM C150 |
| 6 | Fineness (specific surface – Blaine) | BS EN 196 / BS 12 /BS 4027 / ASTM C150 |
| 7 | Heat of hydration | BS 4550 |
| 8 | Chemical analysis if cement | BS EN 196 / BS 12 /BS 4027 / ASTM C150 |
| GGBS/Fly Ash | ||
| 9 | Compressive strength | BS EN 196 / BS 6699 / ASTM C989 |
| 10 | Activity index | BS EN 196 / BS 6699 / ASTM C989 |
| 11 | Setting time | BS EN 196 / BS 6699 / ASTM C989 |
| 12 | Fineness 45micron | BS EN 196 / BS 6699 / ASTM C989 |
| 13 | Soundness | BS EN 196 / BS 6699 / ASTM C989 |
| 14 | Chemical analysis | BS EN 196 / BS 6699 / ASTM C989 |
| Microsilica | ||
| 15 | Compressive strength | BS EN 196 / ASTM C109 |
| 16 | Accelerated pozzolanic strength- activity index | BS EN 13263 |
| 17 | Bulk density | ASTM C1240 |
| 18 | Chemical analysis of microsilica | ASTM C1240 / ASTM C114 / C311 / AAS |
| Admixture | ||
| 19 | Test mix of admixture to comply with ASTM C494 | ASTM C494/C494 |
| 20 | Chemical analysis of admixture | ASTM / IHTP |
| Sl.No. | Test description | Test Method |
| 1 | Tensile strength and elongation of rebars | BS 4449 / BS EN 10002 |
| 2 | Bend strength | BS 4449 |
| 3 | Rebend strength | BS 4449 |
| 4 | tensile strength and elongation of structural steel | BS EN 10002 Part 1 / BS EN ISO 6892-1 |
| 5 | Coating thickness | ASTM A775/A775M |
| 6 | Holiday detection (continuity) | ASTM A775/A775M |
| 7 | Adhesion test (flexibility) | ASTM A775/A775M |
| 8 | Tensile strength of coupler | BS EN 10002 / BS 8110 |
| 9 | Tensile/Load test of tie rod | BS EN 10002 / IHTP |
| 10 | Weld shear test | BS 4483 |
| 11 | Shore ‘A’ hardness of water stop | ASTM D2240 |
| 12 | Brinell hardness | ASTM E384 |
| 13 | Rockwell hardness | ISO 898-1 |
| 14 | Tensile strength of PC wire strand | ASTM A 416 |
| 15 | Load testing of manhole cover/frame | BS EN 124 |
| 16 | Coating thickness on manhole cover | BS 3900 |
| 17 | Load testing of cable tray | IHTP |
| 18 | Load testing of scaffolding components | IHTP |
| 19 | Salt spray test | ASTM B117 |
| 20 | Pull out test of rebar/anchor | BS 1881 Part 207/ASTM C900 |
| 21 | Pull off test on paint | ASTM D4541 |
| Sl.No. | Test description | Test Method |
| 1 | Compressive Strength of Masonry Blocks (Hollow) | BS 6073 |
| 2 | Compressive Strength of Masonry Blocks (Solid) | BS 6073 |
| 3 | Measurement of Dimension of Masonry Blocks | BS 6073 |
| 4 | Water Absorption of Masonry Blocks | BS 6073 |
| 5 | Determination of Compressive Strength of Paving Blocks | BS 6717 |
| 6 | Measurement of Dimension of Concrete Paving Blocks | BS 6717 |
| 7 | Water Absorption of Paving Blocks | BS 6717 |
| 8 | Compressive strength of AAC blocks | BS EN 772-1 |
| 9 | Transverse astrength of terrazzo tiles | BS 4131 |
| 10 | Density and water absorption of terrazzo tiles | BS 4131 |
| 11 | Compressive strength of marble/granite tiles | ASTM C170 |
| 12 | Modulus of rupture of marble/granite tiles | ASTM C99 |
| 13 | Density and water absorption of tiles | ASTM C97 |
| 14 | Flexural strength of marble/granite tiles | ASTM C880 |
| 15 | Determination of dimensions and surface quality (Length, width, thickness, edge straightness, surface flatness, rectangularity) of ceramic tiles | BS EN ISO 10545 |
| 16 | Water absorption of ceramic tiles | BS EN ISO 10545 |
| 17 | Modulus of rupture of ceramic tiles | BS EN ISO 10545 |
| 18 | Resistance to stain of ceramic tiles | BS EN ISO 10545 |
| 19 | Resistance to household chemicals | BS EN ISO 10545 |
| 20 | Coefficient of linear thermal expansion | BS EN ISO 10545 |
| 21 | Resistance to thermal shock | BS EN ISO 10545 |
| 22 | Crazing resistance of ceramic tiles | BS EN ISO 10545 |
| 23 | Frost resistance (weather test) | BS EN ISO 10545 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Bursting Strength | ASTM D 3786 |
| 2 | Weathering Test (Uv) | ASTM D 4355/EN 12224 |
| 3 | Trapezoidal Tear | ASTM D 4491/BS EN ISO 11058 |
| 4 | Wide Width Tensile | ASTM D 4595/BS EN ISO 10319 |
| 5 | Grab Strength | ASTM D 4632 |
| 6 | Apparent Opening Size | ASTM D 4751/BS EN ISO 12956 |
| 7 | Index Puncture Resistance | ASTM D 4833 |
| 8 | Mass Per Unit Area | ASTM D 5261/BS EN 965/BS EN ISO 9864 |
| 9 | CBR Puncture Strength | ASTM D 6241/BS EN ISO 12236 |
| 10 | Thickness | BS EN 964/BS EN ISO 9863 |
| 11 | Tensile Strength – Joints/Seams | BS EN ISO 10321 |
| 12 | Dynamic Perforation – Cone Drop | BS EN ISO 13433 |
| 13 | Resistance Of Alkaline Of Geotextile | BS EN 14030 |
| 14 | Resistance Of Acid Of Geotextile | BS EN 14030 |
| 15 | Flow Rate | BS EN ISO 11058 |
| 16 | Permeability | ASTM D 4491 |
| 17 | Resistance To Microbiological Activity By Burial | BS EN 12225 |
| 18 | Strip Tensile | ASTM D 5035 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Water Absorption | ASTMD 570 |
| 2 | Tensile Strength & Elongation | ASTM D 638/BS 2782 |
| 3 | Flexural Strength | ASTM D 790/ASTM C 581 |
| 4 | Density Of Grp Lining | ASTM D 792 |
| 5 | Stiffness For Grp Pipe | ASTM D 2412 |
| 6 | Barcol Hardness | ASTM D 2543 |
| 7 | Dimension Of Pipe | ASTM D 3262 |
| 8 | Shear Strength | ASTM D 4475 |
| 9 | Hoop Tensile | ASTM D 2240 |
| 10 | Compression Test | ASTM D 695 |
| 11 | Mass Loss On Ignition | ASTM D 2584 |
| 12 | Changes In physical Properties | After Immersion In Acids & Alkalies ASTM / IHTP |
| 13 | Modulus Of Elasticity | ASTM D 790 |
| 14 | Longitudinal Compressive Stress | BS ISO 25780 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Tensile Strength & Elongation | BS 2782/ASTM D 638/ASTM D 412 |
| 2 | Tear Strength | ASTM D 624 |
| 3 | Shore “A” Hardness | ASTM D 2240 |
| 4 | Specific Gravity | ASTM D 792 |
| 5 | Water Absorption | ASTM D 570 |
| 6 | Swell Test | IHTP |
| 7 | Dimension Of Water Stop | IHTP |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Bending Strength | ASTM D 143/BS 5268/BS EN 789,ASTM D 790, BS EN 408 |
| 2 | Load Deflection Test | |
| 3 | Compressive Strength | ASTM D 143/BS 5268/BS EN 789/BS EN 408 |
| 4 | Tensile Strength | ASTM D 143/BS 5268/BS EN 408 |
| 5 | Density | BS 5268/BS EN 942/BS EN 323 |
| 6 | Bending Strength & Modulus Of Elasticity | BS 5268/BS EN 789/ASTM D 143/ BS EN 408 |
| 7 | Moisture Content | BS EN 942, BS EN 322 |
| 8 | Shear Strength | DN EN 3377, ASTM D 143 |
| 9 | Bearing Resistance | DN EN 3378 |
| 10 | Thermal Conductivity | ASTM C 518 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Flexural Strength | ASTM C 947 |
| 2 | Pull Out Test | ASTM C 1230 |
| 3 | Bending Strength | BS EN 1170 |
| 4 | Density | BS EN 1170 |
| 5 | Water Absorption | BS EN 1170 |
| 6 | Shear Load Test | ASTM E 488 |
| 7 | Fibre Content (Wash Out Method) | BS EN 1170 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Dimension & Surface Quality | BS EN ISO 10545/ASTM C 485 |
| 2 | Thermal Shock | BS EN ISO 10545/ASTM C 484 |
| 3 | Water Absorption | BS EN ISO 10545 / ASTM |
| 4 | Modulus Of Rupture & Breaking Strength | BS EN ISO 10545/ASTM C 99 |
| 5 | Frost Resistance | BS EN ISO 10545 |
| 6 | Breaking Load | BS EN ISO 10545 |
| 7 | Thickness | ASTM C 499 |
| 8 | Moh’s Hardness | BS 6431 |
| 9 | Crazing Resistance | ASTM C 424 |
| 10 | Slip Resistance | ASTM E 303 |
| 11 | Stain Resistance | ASTM C 1378 |
| 12 | Weathering | ASTM C 1026 |
| 13 | Chemical Resistance | ISO 10545 |
| 14 | Porosity | ISO 110545 |
| 15 | Abrasion Resistance | BS EN 1339 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Compressive Strength | ASTM D 1621 |
| 2 | Density | ASTM 1622 |
| 3 | Long Term Water Absorption | BS EN 12087 |
| 4 | Thermal Conductivity | ASTM C 518 |
| 5 | Tensile Adhesion | ASTM D 1623 |
| 6 | Water Vapour Transmission | ASTM E 96 |
| 7 | Water Absorption | ASTM C 272 |
| 8 | Water Absorption By Volume | ASTM D 2842 |
| 9 | Flexural Strength | ASTM C 203 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Dimension & Weight | ASTM B 85 |
| 2 | Physical & Mechanical Properties | IHTP |
| 3 | Compression | IHTP |
| 4 | Water Absorption | ASTM C 373 |
| 5 | Glaze Thickness | IHTP |
| 6 | Bond Strength | IHTP |
| 7 | Concavity & Convexity | IHTP |
| 8 | Moh’s Hardness | BS 6431 |
| 9 | Bond Strength | IHTP |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Specific Gravity | ASTM C 97 |
| 2 | Water Absorption | ASTM C 97 |
| 3 | Modulus Of Rupture | ASTM C 99 |
| 4 | Flexural Strength | ASTM C 880 |
| 5 | Skid Resistance | ASTM E 303 |
| 6 | Shear Load Test | ASTM E 488 |
| 7 | Compressive Strength | ASTM C 170 |
| 8 | Specific Gravity | ASTM C 97 |
| 9 | Moh’s Hardness | BS 6431 |
| 10 | Breaking Load @ Dowel Hole | BS EN 13364 |
| 11 | Dimensions | ASTM |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Dimensional Stability | IS 15532 |
| 2 | Confluence Lime (Weld Line) | IS 15532 |
| 3 | Resistance To Applied Load | IS 15532 |
| 4 | Handle Strength | IS 15532 |
| 5 | Resistance To Drop | IS 15532 |
| 6 | Appearance & Surface Finish | IS 15532 |
| 7 | Resistance To Environment Stress Cracking | IS 15532 |
| 8 | Dimension & Mass | IS 15532 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Shear Strength | ASTM D 6392 |
| 2 | Tensile Strength & Elongation | ASTM D 6693 |
| 3 | Puncture Resistance | ASTM E 154/ASTM D 4833 |
| 4 | Dimensional Stability | ASTM D 1204 |
| 5 | Tear Strength | ASTM D 1004/ASTM D 624 |
| 6 | Specific Gravity | ASTM D 792 |
| 7 | Melt Flow Index | DIN EN ISO 1133 |
| 8 | Thickness | ASTM D 5199 |
| 9 | Specific Gravity | ASTM D 792 |
| 10 | Peel Strength | ASTM D 6392 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Tensile Strength & Elongation | ASTM D 146/ASTM D 412/ASTM D 5147/BS 2782/DIN EN 12311/UEAtc |
| 2 | Tensile Strength & Elongation | ASTM D 638/ASTM D 882 |
| 3 | Water Absorption | ASTMD 570/ASTM D 5147 |
| 4 | Tear Strength | ASTM D 624/ASTM D 1004/ASTM D 4073/ASTM D 5147/DIN EN 12310 UEAtc |
| 5 | Adhesion Test | ASTM D 1000 |
| 6 | Low Temperature Flexibility | ASTM D 1970/ASTM D 5147 |
| 7 | Thickness | ASTM D 5147/DIN EN 1849 |
| 8 | Dimension Stability | ASTM D 5147/UEAtc |
| 9 | Heat Resistance | ASTM D 5147/DIN EN 1110/DIN 52123 |
| 10 | Puncture Resistance | ASTM E 154 |
| 11 | Mass Per Unit Area | DIN EN 1849 |
| 12 | Shear Resistance To Joints | DIN EN 12317/UEAtc |
| 13 | Static Puncture | DIN EN 12730/UEAtc |
| 14 | Drying Time | ASTM C 309, ASTM D 1640 |
| 15 | Crack Bridging Ability Of Liquid | ASTM C 1305 |
| 16 | Chisel Puncture | IHTP |
| 17 | Density | IHTP |
| 18 | Weathering Test (UV) | ASTM D 5147, UEATC |
| 19 | Water Vapour Transmission | ASTM E 96 |
| 20 | Reinforcement | IHTP |
| 21 | Asphalt Content | ASTM D 545 |
| 22 | Chemical Resistance | ASTM D 543 |
| 23 | Hydrosratic Pressure Test | ASTM D 5385, DIN EN 1048, BS EN 12340 UEATC |
| 24 | Softening Point | ASTM D 36 |
| 25 | Penetration | ASTM D 5 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Tensile Strength & Elongation | ASTM D 638/BS 3506/ISO 6259/ISO 13954 |
| 2 | Delamination | BS 3505 |
| 3 | Dimension | BS 3506/BS EN 1452, ISO 4427 |
| 4 | Longitudinal Heat Eversion | BS 3506/BS EN 1452, ISO 4427 |
| 5 | Impact Resistance | BS 3506/ISO 3127 |
| 6 | Physical Appearance | BS EN 1452 |
| 7 | Bend Test On Welded Joints | BS EN 12814, DVS 2203 |
| 8 | Izod, Charpy Impact Test | ASTM D 256/ASTM D 4508/ASTM D 6110/ASTM D 4812/ISO 180/ISO 25005 |
| 9 | Hydrostatic Pressure Test | DIN 8061, BS EN 1452, ISO 4427 |
| 10 | Opacity | ASTM D 1746 |
| 11 | Melt Flow Index Test | ASTM D 1238/ISO 1133 |
| 12 | Vicat Softening Point | ASTM D 1525/ISO 306 |
| 13 | Carbon Black Content | ASTM D 1603 |
| 14 | Accelerated Weathering Test | ASTM D 4329 |
| 15 | Temperature Deflection Under Load | ISO 75 1 & 2 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Flexural Strength | ASTM C 1396/BS EN 520/ASTM C 473 |
| 2 | Nail Pull Resistance | ASTM C 1396/ASTM C 473 |
| 3 | Core, End & Edge Hardness | ASTM C 1396/ASTM C 473 |
| 4 | Humidified Deflection | ASTM C 1396/ASTM C 473 |
| 5 | Thickness, Length & Width | ASTM C 1396/ASTM C 473 |
| 6 | End Squareness | ASTM C 1396/BS EN 520/ASTM C 473 |
| 7 | Water Absorption | ASTM C 1396/ASTM C 473 |
| 8 | Tapper Profile | ASTM C 1396/ASTM C 473 |
| 9 | Water Absorption Surface | BS EN 520/ASTM C 473/ASTM C 1177 |
| 10 | Water Absorption Surface | ASTM C 1396/ASTM C 473 |
| 11 | Surface Hardness | ASTM C 1396/ASTM C 473 |
| 12 | Dimension | ASTM C 1396/ASTM C 473 |
| 13 | Density | BS EN 520 |
| 14 | Deflection Under Load | BS EN 520 |
| 15 | Shear Strength | BS EN 520 |
| 16 | Gypsum Content | IHTP |
| 17 | Thermal Conductivity | ASTM C 518 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Shore “A” Hardness | ASTM C 661/ASTM C 920/ASTM D 2240 |
| 2 | Adhesion In Peel Off Joint | ASTM C 794 |
| 3 | Application Life | BS 4254 |
| 4 | Rheological Properties | BS 4254 |
| 5 | Peel Strength | BS 4254 |
| 6 | Staining | BS 4254/ASTM D 2203 |
| 7 | Loss Of Mass After Heat Aging | BS 4254 |
| 8 | Adhesion & Tensile Modulus | BS 4254 |
| 9 | Plastic Deformation | BS 4254 |
| 10 | Tensile Properties | ISO 8339 |
| 11 | Crack Bridging Ability | ASTM C 1305 |
| 12 | Volume Shrinkage | IHTP |
| 13 | Tack Free Time | ASTM C 87/ASTM C 920 |
| 14 | Flow Of Sealant | SS-S-200E |
| 15 | Bond To Concrete | SS-S-200E |
| 16 | Self Levelling | SS-S-200E |
| 17 | Weight Loss, Cracking | ASTM C 792 |
| 18 | Extension Recovery & Adhesion | ASTM C 736 |
| 19 | Accelerated Weathering (UV) | ASTM C 920 |
| 20 | VOC | USEPA 24 Method |
| 21 | Density | ASTM D 1475 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Compression Set | ASTM D 395/BS EN 681/ISO 4633/AASHTO M 251 |
| 2 | Adhesive Strength | ASM D 429 |
| 3 | Shore “A” Hardness | ASTM D 2240/ISO 4633 |
| 4 | Tensile Strength & Elongation | ASTM D 638/ISO 4633/ASTM D 412/ASSHTO M 251 |
| 5 | Tear Strength | ASTM D 624 |
| 6 | IRHD Hardness | ISO 48 |
| 7 | Flexibility | ASTM F 137 |
| 8 | Dimensional Stability | ASTM D 2199,ASTM D 1204 |
| 9 | Density | ASTM D 1622,ASTM D 297 |
| 10 | Volume Change | ISO 4633,ASTM D 471, BS ISO 1847 |
| 11 | Load Deflection Properties | ASTM D 575 |
| 12 | Specific Gravity | ASTM D 792 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Izod, Charpy Impact Test | ASTM D 256/ASTM D 4508/ASTM D 6110/ASTM D 4812/ISO 180/ISO 25005 |
| 2 | Thickness & Gauge | ASTM D 4397 |
| 3 | Density | ASTM D 792 |
| 4 | Water Absorption | ASTM D 570 |
| 5 | Tensile Strength & Elongation | ASTM D 638,ASTM D 412,BS 2782 |
| 6 | Tear Resistance | ASTM D 1004, ASTM D 624 |
| 7 | Breaking Force Of Fiber Rope | BSEN ISO 1346,BSEN ISO 2307 |
| 8 | Opacity | ASTM D 1746 |
| 9 | Carbon Black Content | ASTM D 1603 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Density | ASTM D 545,ASTM D 1751 |
| 2 | Compression & Recovery | ASTM D 545,ASTM D 1751 |
| 3 | Extrusion | ASTM D 545,ASTM D 1751 |
| 4 | Water Absorption | ASTM D 545,ASTM D 570,ASTM D 3575 |
| 5 | Distortion | ASTM D 994 |
| 6 | Brittleness | ASTM D 994 |
| 7 | Weathering Test | DOT Series 1000 |
.
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Tensile Strength & Elongation | ASTM D 6637,BSEN ISO 10319 |
| 2 | Mass Per Unit Area | |
| 3 | Tear Strength | BS 2782, BS EN ISO 527 |
| 4 | Tensile Strength & Elongation | ASTM D 882, BS EN ISO 527 |
| 5 | Dimensions & Thickness | |
| 6 | Dart Impact | ASTM D 1709 |
| Sl.No. | Test description | Test Method |
|---|---|---|
| 1 | Salt Spray Test | ASTM B 117, ISO 9227 |
| 2 | Accelerated Weathering (UV) | ASTM D 4587 |
| 3 | Pencil Hardness | ASTM D 3363 |
| 4 | Drying Time | ASTM 1640 |
| 5 | Mandrel Bend Test | ASTM D 522 |
| 6 | Adhesion By Tape test | ASTM D 3359 |
| 7 | Impact Resistance | ASTM D 2794 |
| 8 | Pull Out Test | ASTM D 4541, BS 1881 |
| 9 | VOC | USEPA 24, ASTM D 2697, ASTM D 2361 |
| 10 | Density | ASTM D 1474 |
| 11 | Ageing Resistance In Boiling Water | ASTM D 6665 |
| 12 | Ageing Resistance (Dry Heat Test) | ASTM D 6491 |
| 13 | Coating Flexibility | ASTM D 4145 |
Research and development form the crux of our chemical testing and other processes. We, at AL Hoty-Stanger, provide deformulation, material testing, and identification, followed by failure and polymer analysis. Moreover, we also do soil testing and other specialized tests for the various sectors like textile and agricultural domains.
How We Take forward Our Testing
We have years of experience in testing while complying with the standards of BS, ASTM, AASHTO, CIRIA, and others. After all, we are a leading ISO-9001 organization, and that only gives us plenty of responsibility while providing the best tests.
Our testing includes quality control testing and troubleshooting while also revolutionizing tests for getting accreditation and more. Check our detailed multi-level testing and analytical programs that are critical to concrete testing as well.
Our test results hold great value in every sector, and hence, we provide routine and non-routine testing. We know many companies need to ensure the ingredients quality testing also for ensuring superior durability. Thus, our concrete and chemical analyses are the best.
AL Hoty-Stanger offers RoHS testing and tracing of unknown chemicals in products for the entire Middle East. Contact us to check the components in soil and checks of cementitious materials, steel, asphalt, and more. We offer detailed reports and give detailed notes for use by the authorities.